Administration Guides
Example Report:
Home

Example Report:

SyncIQ Jobs Report 2016-12-16 00:00:00 UTC

Number of Jobs

Clusterlast 24 hourslast 30 days
ds-sim-8-11223
ds-sim-8-2021

Total Amount of Replicated Data in GB

Clusterlast 24 hourslast 30 days
ds-sim-8-1less than 0.01less than 0.01
ds-sim-8-2no dataless than 0.01

Percentage of Jobs Violating RPO

ClusterRPOlast 24 hourslast 30 days
ds-sim-8-1310043
ds-sim-8-25no data23

Average Amount of Replicated Data in GB

Clusterlast 24 hourslast 30 days
ds-sim-8-10.000.00
ds-sim-8-2no data0.00

Average Job Duration in minutes

Clusterlast 24 hourslast 30 days
ds-sim-8-10.180.13
ds-sim-8-2no data0.14

Average Data Transfer Rate in Mb per second

Clusterlast 24 hourslast 30 days
ds-sim-8-10.000.00
ds-sim-8-2no data0.00

Recovery Point Analysis

ClusterDiagnostics
ds-sim-8-2 
ds-sim-8-1Policy accesszone1: setting to run job at the interval 2 minutes per 24 hour period will lower the RPO violation rate.

Refer to  RPO Trending and Reporting in the Eyeglass PowerScale Edition documentation for an explanation of the calculation of diagnostics.

SyncIQ Jobs Troubleshooting

ds-sim-8-2

Policy NameJob IDDetected Problems
EyeglassRunbookRobot_mirror No SyncIQ jobs have been run for the last 24 hours. The average 30 days interval between jobs is 320.14minutes.

ds-sim-8-1

Policy NameJob IDDetected Problems
test Found 43 jobs that have the transfer rate lower than the policy average rate 193.92..

Refer to RPO Trending and Reporting in  the Eyeglass PowerScale Edition documentation detail on SyncIQ Jobs Troubleshooting

** average transfer rate in Mb/s

© Superna LLC